9-Link Steel Watch Bracelet 20mm Compatible with Omega Seamaster Professional 300M 41mm (1993–2018) - Premium

9-Link Steel Watch Bracelet 20 mm for Omega Seamaster 300M 41 mm Pre-2018

Technical Description

316L stainless steel watch bracelet, 9-link style, 20 mm width, equipped with solid curved end-links. This bracelet is designed for pre-2018 generation Omega Seamaster Professional 300M 41 mm watches.

This bracelet is a compatible aftermarket model. It is not manufactured by Omega SA.

Verified Compatibility

Compatible with Omega Seamaster Professional 300M 41 mm watches with a 20 mm lug width, pre-2018 generation.

• Omega Seamaster Professional 300M 2531.80
• Omega Seamaster Professional 300M Quartz 2541.80
• Omega Seamaster Professional 300M 2220.80
• Omega Seamaster Professional 300M 2221.80
• Omega Seamaster Professional 300M 2254.50
• Omega Seamaster Professional 300M 2255.80
• Omega Seamaster Professional 300M 2264.50
• Omega Seamaster Diver 300M 212.xxx in 41 mm case pre-2018

Compatibility Not Guaranteed

This bracelet is not advertised as compatible with the following models:

• Omega Seamaster Diver 300M 42 mm series 210.xxx, generation introduced in 2018
• Omega Planet Ocean
• Omega Aqua Terra
• Omega Railmaster
• Omega Speedmaster Professional
• Omega Seamaster Chronograph

Important: 20mm Width ≠ Guaranteed Compatibility

A lug width of 20 mm is not sufficient to guarantee fitting.

Compatibility also depends on several factors: lug shape, spring bar hole position, end-link curvature radius, case thickness, case middle geometry, and available height between the case and the spring bars.

Therefore, two Omega watches with a 20 mm lug width may require different end-links.

Difference Between Older and Newer Seamaster Models

The pre-2018 Seamaster Professional 300M 41 mm and the modern Seamaster Diver 300M 42 mm series 210.xxx do not use the same case geometry.

Specialized manufacturers generally differentiate between pre-2018 versions and modern 2018+ versions, which confirms that end-links should not be considered interchangeable between these generations.

Installation Recommendations

For reliable installation, it is recommended to use watchmaking-quality spring bars suitable for Omega cases.

Spring bars that are too thin can create slight play or rattling noises. For optimal fit, the use of Omega spring bars or equivalent spring bars of suitable diameter is recommended.

Installation should be performed without forcing. If the end-links do not naturally align with the lug holes, the bracelet should not be installed.

Kit Contents

• 1 x 316L stainless steel 9-link style bracelet
• 2 x solid curved end-links
• 2 x 20 mm spring bars
• 1 x installation tool

Warning

Before purchasing, please verify the exact reference of your watch. This bracelet is intended for pre-2018 Seamaster Professional 300M 41 mm models. It should not be purchased for a modern Seamaster Diver 300M 42 mm series 210.xxx without specific confirmation of end-link compatibility.